This diagram illustrates the arrangement for a 20 amp double receptacle circuit with a shared neutral wire. This arrangement is typically used in a kitchen where two appliance circuits are needed in close proximity to each other.
This is a wiring diagram for an antique floor lamp with 4 bulbs, one main bulb and 3 peripheral, and usually smaller bulbs. The main bulb threads into a standard socket with an integrated switch and the three peripheral bulbs are wired to a single switch. The secondary switch may have wires colored black, blue and red or, if it’s an old switch, other colors or texturing may be used to distinguish them.
The source neutral wire on the receptacle is removed and spliced to the white running to the switch, and to a pigtail back to the receptacle neutral. At the switch, the neutral wire is needed to power some dimmer switches and is now required in most switch boxes.
The wiring in this diagram is for adding a new light fixture to a switched receptacle, i.e. one that is hot only when a switch is on. These are commonly used to turn a table or floor lamp on and off from a wall switch.