An isolated-ground receptacle makes use of an extra wire for a separate ground in the circuit. This is the red wire in the 14/3 cable used here which is marked and connected to the grounding terminal on the receptacle. The other cable wires are connected as with any other circuit except for the ground wire. The bare copper ground wire is NOT connected to the receptacle, instead it is connected to the grounding terminal inside the electrical box where the receptacle is housed.
A doorbell circuit for two or more doors will have a separate contact on the chimes for each button included. At the chimes, one wire from each button is spliced to the output wire on the transformer. The second wire is connected to one of the contact screws on the chimes.
This wiring diagram illustrates installing a 15 amp circuit breaker for a 120 volt circuit. The 14/2 awg cable for this circuit includes 2 conductors and 1 ground. A 15 amp circuit is usually used for wall receptacle outlets and light fixtures.
This page contains wiring diagrams for a service panel breaker box and circuit breakers including: 15amp, 20amp, 30amp and 50amp, as well as a GFCI breaker and an isolated ground circuit.